Filin Aikace-aikace
FGW-160LL na lankwasawa mai gwadawa ana amfani da shi don yin gwaje-gwajen lankwasawa akan sandunan ƙarfe daban-daban da bututun ƙarfe kamar sandunan ƙarfe, faranti, rebars don gini, da bututun ƙarfe na walda na lantarki, bututun ƙarfe mai haɗaka, bututun ƙarfe, bututun ƙarfe, da sauransu. don sanin ƙarfin lanƙwasa filastik su.
FGW-1600LL atomatik Multi-aiki karfe mashaya (karfe tube) lankwasawa gwajin inji ne servo kula da tsarin fasaha da kansa ɓullo da ta kamfanin mu.Yana ɗaukar injunan servo da madaidaicin famfo famfo da sauran rukunin bawul ɗin PLC (mai sarrafa shirye-shirye).
Ƙayyadaddun bayanai
| Samfura | Saukewa: FGW-160LL |
| Matsakaicin lankwasawa diamita na karfe bututu | 60.3mm |
| Goyan bayan tazarar abin nadi | daidaitacce (dace da lankwasawa gwajin na karfe bututu a kasa 60.3mm) |
| Radius na baka na abin nadi mai goyan baya | zaɓi bisa ga diamita na bututun ƙarfe |
| Oil Silinda bugun jini | 400mm |
| Kwangilar lankwasawa | 10º30º90º, (tare da cibiyoyin lanƙwasa daban-daban, ana iya canza kusurwar lanƙwasa) ko kowane kusurwa |
| Tushen wutan lantarki | 220V 50Hz |
| Girma | 950×600×1800mm |
| Nauyi | 800kg |
Teburin daidaitawar gwiwar gwiwar hannu
| Diamita na waje na bututun ƙarfe | Digiri na lankwasawa | Hannun radius na curvature | Curvature radius na gwiwar hannu (bayan galvanizing) | LABARI |
| 26.9 | 10º | 26.9*8 |
| Ruwa samar rufi filastik hada karfe bututu CJ136-2007 |
| 33.7 | 10º | 33.7*8 |
| |
| 42.4 | 10º | 42.4*8 |
| |
| 48.3 | 10º | 48.3 *8 |
| |
| 60.3 | 10º | 60.3*8 |
| |
| 21.3 | 30º | 21.3*8 |
| Karfe-roba hadedde bututu GB/T28897-2012 (epoxy roba mai rufi hada karfe bututu) |
| 26.9 | 30º | 26.9*8 |
| |
| 33.7 | 30º | 33.7*8 |
| |
| 42.4 | 30º | 42.4*8 |
| |
| 48.3 | 30º | 48.3*8 |
| |
| 60.3 | 30º | 60.3*8 |
| |
| 21.3 | 90º | 21.3*6 |
| Dogon lantarki welded karfe bututu GB/T13793-2008 |
| 26.9 | 90º | 26.9*6 |
| |
| 33.7 | 90º | 33.7*6 |
| |
| 42.4 | 90º | 42.4*6 |
| |
| 48.3 | 90º | 48.3*6 |
| |
| 60.3 | 90º |
| 60.3*8 | |
| 21.3 | 90º | 21.3*6 | 21.3*8 | GB-T 3091-2001; Welded karfe bututu don low matsa lamba ruwa sufuri |
| 26.9 | 90º | 26.9*6 | 26.9*8 | |
| 33.7 | 90º | 33.7*6 | 33.7*8 |
|
| 42.4 | 90º | 42.4*6 | 42.4*8 | |
| 48.3 | 90º | 48.3*6 | 48.3*8 | |
| 60.3 | 90º | 60.3*6 | 60.3*8 | |
| Karfe bututu misali sanyi (shaded part gana GB-T 3091-2001; welded karfe bututu don low-matsi ruwa sufuri) | ||||
Mabuɗin Siffofin
1. Ikon atomatik na kowane kusurwar lanƙwasawa:
Nuni na ainihi na dijital na kusurwar lanƙwasa, aikin maɓallin taɓawa na iya cimma 90 º, 30 º da aka ƙayyade ta ka'idodin ƙasa da sauran ƙa'idodi, 10 º atomatik lankwasawa na bututun ƙarfe (an saita software, zaɓin sake zagayowar maɓalli ɗaya), Hakanan ana iya lankwasa ta atomatik. a kowane kusurwa (kasa da 90 º) ta hanyar shigar da maɓallin taɓawa bisa ga buƙatun mai amfani, aiki ɗaya maɓalli ta atomatik yana kammala saitunan abokin ciniki Kunguwar lanƙwasa da gwiwar hannu suna dawowa ta atomatik, aikin yana da sauƙi.
2. Sarrafa ta atomatik na saurin lodi na sabani:
Gudun gwajin da ya dace da buƙatun ƙa'idodin ƙasa, kamar: 1mm / s ± 0.2mm, ana iya saita shi zuwa kowane saurin gwaji, saurin gwajin shine: 0-100mm / min, kuma daidaiton gwajin shine ± 0.5%
3. Ikon ƙaura ta atomatik:
Matsakaicin iyaka 0-400mm
The FGW-160LL cikakken atomatik (karfe bututu) karfe bar lankwasa gwajin inji ana sarrafa ta servo motor.Hayaniyar kayan aiki yana da ƙasa sosai (kimanin daidai da ƙarar kwandishan), kuma ƙarfin wutar lantarki shine 220V, wanda ya dace da dakunan gwaje-gwajen ginin ofis ko wuraren gwaji na ƙarshe.
Daidaitawa
Ya cika sabbin ma'auni GB/T 1499.2-2018 "Gwajin Lankwasa Ƙarfe" da GBT244-2008 "Tsarin Gwajin Ƙarfe na Ƙarfe" da sauran ƙa'idodi masu dacewa.
